One short email when we publish something worth reading.
Tables, sinks, cabinets and carts built in our own shop in Ville Saint-Laurent. Standard sizes off the list, or built to your specifications.
Most projects are a mix: listed sizes where they fit, custom where the wall doesn't cooperate.
Sizing runs width × depth. Each family shows how many listed sizes it has right now.
Cutting tables, prep tables and equipment stands, with or without a 4" backsplash.
One to three compartments, hand-wash, fish, coved, pedestal, wall-mount and closed base.
Flat top or with backsplash, sliding or hinged doors.
Tray carts, Z-carts and knock-down carts for moving product.
Uprights, cantilever shelves and dunnage racks for the walk-in.
Drains, faucets, risers, hoses and sink accessories.
The catalogue is the fast answer. These are the three reasons it sometimes isn't the right one.
Existing buildings have columns, drains and door swings the catalogue never accounted for.
A new table beside ten existing ones is judged on whether the height and edge read as one run.
Drainage, wall gaps and cleaning access are checked on site, not on the drawing.
Whether you pick from the list or send a drawing, these are the questions that shape the unit.
What the surface has to survive, and how it is cleaned.
Welded is rigid and easier to clean. Knock-down fits through a narrow door.
Against a wall, a 4" splash. Free-standing, a flat top.
Whether the unit moves for cleaning, or levels once and stays.
Where the water goes, and how much room the inspector wants around it.
A column, a drain, a door swing or ten existing tables set the size instead of the catalogue.
Ordered by part number from more than 200 listed sizes. If two inches won't be noticed, this is the answer.
Band saws, grinders and slicers from Dadaux and Omega Minerva, for the tables we build.
Refrigerated, hot and seafood cases for the counter in front of the prep room.
Casters and parts that keep carts and mobile units rolling.
Yes. Tables, sinks, cabinets and carts are built in our own shop in Ville Saint-Laurent, Montréal.
Yes. Every stainless steel product can be built to your specifications. Send a dimensioned drawing or measurements, plus photos if you are matching an existing unit.
Many listed sizes can be ordered directly from the product page. Custom dimensions and larger projects are quoted.
Yes. Drains, faucets, risers, hoses and sink accessories are in the Plumbing collection.
Welded is more rigid and easier to clean. Knock-down ships flat and fits through a narrow door. Several carts come in both.
Tell us what you need here. Once we reply, a dimensioned drawing, a marked-up sketch or photos with a tape in frame are all enough to quote from.